LifterLMS Advanced Videos: Video Completion Tracking Set Up Right

What the LifterLMS Advanced Videos add-on tracks, how Require Video Completion, Auto-Advance and Auto-Play cascade from global to course to lesson, how to stop skipping, and when core minimum lesson time is the better tool.

  • Add as a preferred source on Google
Illustration for “LifterLMS Advanced Videos: Video Completion Tracking Set Up Right”

On a video course, the Mark Complete button is an honour system. A student can open a lesson, click the button and move on without pressing play. For many courses that is fine. For compliance training, continuing education or any course that issues a certificate, it is not.

LifterLMS Advanced Videos is the paid add-on that ties lesson completion to video playback. This guide explains what it tracks, how its settings cascade, how to set it up for a course where watching matters, and where its limits are. Add-on details come from the official LifterLMS documentation; core details were checked against LifterLMS 10.3.

For choosing where to host the videos in the first place, see the best video hosting for LifterLMS.

What LifterLMS Advanced Videos does

The add-on replaces the standard embed for the lesson's main video with a tracked player and adds four behaviours:

  • Require Video Completion: the Mark Complete button stays disabled until the video has been watched to the end.
  • Auto-Advance: when the video finishes, a countdown appears and the student is sent to the next lesson, quiz or assignment. Auto-Advance Countdown sets the seconds.
  • Auto-Play: after an auto-advance, the next lesson's video starts on its own.
  • Resume: the player remembers where each student stopped and picks up a few seconds earlier on the next visit.

It also offers a slim player with only play and pause, which removes the progress bar so students cannot skip ahead, and it records how much of each video a student watched for reporting.

LifterLMS documents provider integrations for YouTube, Vimeo and Wistia, the product page also lists GoDAM, and the getting started guide says self-hosted videos work too. It requires LifterLMS 6.0 or later. The add-on is sold on its own and included in the Infinity Bundle at the time of writing; see the Advanced Videos product page for current pricing.

Which video is tracked

Only the lesson's Video Embed Url, the field on the lesson's General settings and in the course builder's lesson settings, is tracked. Videos placed in the lesson content with an embed block, a page builder module or an iframe are ignored.

That has two consequences for course design:

  • One tracked video per lesson. If a lesson has three videos, only the one in the Video Embed Url field counts. Split long lessons into one video each.
  • Check your templates. Some page builder lesson templates hide the default video area. The tracked player must actually render, or the button never unlocks.

How settings cascade: global, course, lesson

Every Advanced Videos option can be set at three levels:

LevelWhereValues
GlobalLifterLMS > Settings > Courses, in the Advanced Videos progression sectionOn or off (all off by default)
CourseCourse editor, Course Options box, Advanced Videos tabInherit global, Enabled or Disabled
LessonCourse builder, lesson settings, after a Video Embed Url is enteredCourse Setting, Global Setting, Enabled or Disabled

A lesson set to "Course Setting" follows its course; "Global Setting" skips the course and uses the site default. The most specific setting wins. A sensible pattern is: everything off globally, Require Video Completion enabled on the courses that need it, and disabled on individual lessons such as an optional bonus video.

The global options only appear once at least one video provider is enabled under LifterLMS > Settings > Integrations.

Set up video completion tracking step by step

  1. Install and activate Advanced Videos with your licence.
  2. Check permalinks. The documentation requires the Post name permalink structure under Settings > Permalinks.
  3. Enable your provider under LifterLMS > Settings > Integrations: open YouTube, Vimeo or Wistia, tick enable and save. Set Disable Controls there if you want the slim player.
  4. Choose global defaults under LifterLMS > Settings > Courses. Leave them off if only some courses need tracking.
  5. Enable per course. In the course editor, open the Advanced Videos tab in Course Options and set Require Video Completion to Enabled.
  6. Paste each video URL into the lesson's Video Embed Url field in the course builder. Click outside the field to reveal the lesson-level video settings.
  7. Add prerequisites if order matters. Require Video Completion only controls the Mark Complete button. It does not stop a student opening the next lesson. Use lesson prerequisites for that; see drip content and prerequisites.
  8. Test as a student on desktop and on a phone: the button should be disabled, unlock at the end of the video, and the lesson should complete.

The full walkthrough is in the official Advanced Videos getting started guide.

Preventing skipping

Require Video Completion asks that the video reaches its end. LifterLMS's documentation does not promise that it detects scrubbing to the end, and recommends Disable Controls to stop students skipping ahead. Consider the trade-off before switching controls off:

  • Without controls, students cannot rewind ten seconds to re-hear something, change speed or turn on captions in some players. That is a real accessibility cost.
  • With controls, a determined student can drag to the end on some providers.

For most professional training, a better balance is to keep controls, require completion, and add a short quiz on the video's key points. Where an auditor needs proof of time on task, combine it with core lesson time tracking.

Advanced Videos or core minimum lesson time?

Since LifterLMS 10.1, core can stop a lesson being completed until a minimum time has been spent on it. Turn on Enable Minimum Time on the lesson's General tab and set hours, minutes and seconds. It measures time spent on the lesson page, not playback, and is not available on free lessons.

QuestionAdvanced VideosCore minimum time
CostPaid add-onFree
MeasuresVideo playback to the endTime on the lesson page
Works with any hostSupported providers and self-hostedYes, any content
Auto-advance and resumeYesNo
ReportingPercentage watched per lessonTime spent per lesson

For video-led courses where the experience matters, Advanced Videos is the better tool. For mixed lessons of video, reading and downloads, or a host it does not support, minimum time is simpler. Our lesson time tracking guide explains the core feature.

Reporting on video watching

According to the documentation, the student's course report gains a Video column showing the percentage of each lesson's video the student has watched. Use it to answer support questions such as "I watched it but the button won't unlock" and to spot lessons where many students stop early, which usually means the video is too long.

For aggregated reports across students, such as average watch percentage per lesson, you will need a custom report. See building custom LifterLMS reports.

Troubleshooting

  • The button never unlocks. The video is in the content rather than the Video Embed Url field, the provider is not enabled, or a script error stops the player. Check the browser console. Our guide to videos not playing in LifterLMS covers player problems.
  • YouTube link does not work. The documentation warns against links containing watch_popup. Use the standard watch or share URL.
  • Students skip lessons anyway. Expected without prerequisites; add them.
  • Auto-play does not start. Browsers block autoplay with sound unless the user has interacted with the page. It may need a click.
  • Caching. Exclude logged-in users from page caching so each student's player state and button are correct.

Frequently asked questions

Can LifterLMS require students to watch the whole video without an add-on?

Not by tracking playback. Core can require a minimum time on the lesson, which is a good substitute for many courses.

Does Advanced Videos work with Bunny Stream or Vimeo Showcase?

LifterLMS documents YouTube, Vimeo, Wistia and self-hosted video, and the product page lists GoDAM. For any other host, test on staging before you commit.

Can I require only 90% of the video?

The documentation describes requiring the full video and does not offer a percentage threshold. A partial threshold would be custom work.

Does it work in focus mode?

The documentation does not address focus mode specifically. Test your course in the layout you use before launch.

What to do next

Decide which courses truly need proof of watching. Enable Require Video Completion only there, add prerequisites so order is enforced, and test one full course as a student on a phone.

If you need watch thresholds, video data in compliance reports, or tracking for a host the add-on does not support, our LifterLMS integrations service can build it. Tell us where your videos are hosted and what you need to prove.

Add LifterLMS Expert to your preferred sources

Add lifterlmsexpert.com as a preferred source on Google, or open this article in your AI assistant to use it as a source.

  • Add as a preferred source on Google
Free consultation

Prefer expert help over DIY?

Skip the trial and error. Get specialist LifterLMS help and ship faster.

Talk to a LifterLMS Expert Explore our services

Replies within one business day