LifterLMS and Kit (ConvertKit): Tag Students and Build Sequences

Connect LifterLMS to Kit (formerly ConvertKit), tag students by course and access plan, sync purchases, and build the onboarding and upsell sequences that actually move a course business forward.

  • Add as a preferred source on Google
Illustration for “LifterLMS and Kit (ConvertKit): Tag Students and Build Sequences”

If you sell courses with LifterLMS and send email with Kit (the platform formerly called ConvertKit), the official LifterLMS Kit add-on connects the two. Students are added to Kit tags and sequences when they register or enroll, and purchases can flow into Kit so you can trigger automations from them.

This guide is for course creators and the people who run their sites. You will learn how the LifterLMS ConvertKit integration works, how to set it up, how to plan tags so they still make sense when you have twenty courses, and which email sequences are worth building first. We also cover what the add-on does not do and how to fill those gaps.

Settings and labels below follow the LifterLMS Kit documentation at the time of writing. Some WordPress screens still say "ConvertKit", so treat the two names as the same product.

What the LifterLMS Kit add-on does

LifterLMS Kit is a paid add-on from LifterLMS, sold on its own and included in the higher bundles. It does four jobs:

  • Registration automations. Any new account, from a registration form or from checkout, can be added to chosen tags and sequences.
  • Course and membership automations. Each course and membership gets a Kit tab where you pick the tags and sequences applied on enrollment.
  • Purchase sync. Orders paid through LifterLMS payment gateways can be sent to Kit, which makes the Purchase event available in Kit's automation builder.
  • Custom field mapping. LifterLMS user fields, such as phone or address, can be mapped to Kit custom fields.

All of it depends on consent. A student who does not tick the consent checkbox is not added to any tag or sequence. That is good for compliance, and it is also the first thing to check when someone "did not get tagged".

What it does not do

The add-on works at the moment of registration, enrollment and purchase. It does not tag students when they complete a lesson or course, fail a quiz, or lose access. The documentation does not describe removing tags on unenrollment either. If you need progress-based email, you will add another layer, covered further down.

Connect Kit to LifterLMS

  1. Install and activate the LifterLMS Kit add-on alongside LifterLMS.
  2. In Kit, open your account's advanced settings and reveal the API Secret.
  3. In WordPress, go to LifterLMS > Settings > Integrations > LifterLMS Kit.
  4. Tick Check to Enable this Integration.
  5. Paste the key into Kit API Secret and click Save Changes. LifterLMS verifies the connection when the page reloads.

Keep the secret in a password manager, not in a shared document. Anyone with it can read and change your Kit subscriber list.

The settings include a Subscriber Consent Message, shown at enrollment, checkout and registration, and an Unsubscribe Message, shown on the Edit Account tab of the student dashboard. Write them in plain language: "Send me course tips and occasional offers by email" is clearer than legal boilerplate. If you run a free course as a lead magnet, the consent message is where you earn the right to email, so make it specific.

Tags and sequences on registration and enrollment

There are two levels, and they stack.

  • New User Registration Automations on the integration screen apply to every new account. Use them for broad tags such as "Student" and for a general welcome sequence.
  • The Kit tab on each course and membership applies tags and sequences when someone enrolls in that product. Use it for "Enrolled: Course name" tags and for course-specific onboarding.

A student who registers at checkout for a course gets both: the registration automations and that course's automations. Avoid adding the same sequence at both levels, or you will rely on Kit to de-duplicate it.

Enrollment from any source triggers the course automations, including manual enrollment by an admin, a membership that auto-enrolls into courses, and the REST API. That is useful for team or bulk enrollments, but remember it when you import a few hundred existing students: they will all enter the onboarding sequence unless you plan for it.

Plan a tag structure that scales

Tags are cheap to create and painful to clean up. A simple naming convention keeps Kit usable as the catalog grows.

Tag patternApplied byUsed for
StudentRegistration automationsEveryone with an account; exclude from lead-magnet promos
Enrolled: [Course]Course Kit tabOnboarding, course announcements
Member: [Membership]Membership Kit tabMember newsletters, renewal reminders
Purchased: [Plan]Kit automation on the Purchase eventSeparating buyers of a free plan from paying customers
Completed: [Course]Extra layer (see below)Upsells, reviews, testimonials

Use one prefix per meaning and never reuse a tag for two purposes. When a course is retired, keep its tags: they are a record of who bought what.

Purchase sync and Kit automations

Turn on Sync Subscriber Purchases to send orders from LifterLMS payment gateways to Kit. A few rules from the documentation shape how you use it:

  • Each access plan is a separate product in Kit, so you can target a specific plan, such as the annual plan or the payment plan.
  • Orders of $0 are not sent. Free enrollments still get course tags, but they are not purchases.
  • A product appears in Kit only after it has been bought once. To build automations before launch, place a test purchase with a test user, then delete the test data.
  • Purchases made through WooCommerce are not sent by this add-on. If you sell through WooCommerce, the documentation points to Kit's own WooCommerce plugin for purchase data.

With purchases in Kit you can stop pitching a course to people who already own it, and start a post-purchase sequence that differs from the free-trial sequence. Our guide to payment plans and free trials explains how access plans are set up on the LifterLMS side.

Email sequences worth building first

1. Course onboarding

Three to five emails over the first two weeks: how to log in, where the student dashboard is, what to do in week one, and how to get help. Attach it to the course's Kit tab. Most refund requests and "I can't find my course" tickets come from this period.

2. Lead magnet to paid course

Run a free mini-course with a free access plan. Its Kit tab applies an "Enrolled: Free course" tag and a sequence that teaches, then invites people to the paid course. Exclude anyone tagged with a purchase of that course.

3. Post-purchase upsell

Trigger on the Purchase event for one plan and pitch the next logical product a few weeks later. Time it to when a typical student is about halfway through, not the day after they buy.

4. In-course nudges, sent by LifterLMS instead

Emails such as "you finished module two" or "here is your certificate" are tied to progress, which the Kit add-on does not see. LifterLMS's own engagements and automated emails handle these well and fire on lesson, section, course and quiz events. Keep marketing in Kit and progress messages in LifterLMS, and students get the right email from the right system.

Tagging completions in Kit

If you want "Completed: [Course]" in Kit, for upsells or review requests, you have three routes:

  • WP Fusion, a third-party plugin that applies CRM tags on course and lesson completion, among much else. See our WP Fusion guide.
  • A webhook to an automation tool that calls Kit's API. LifterLMS has a progress.updated webhook topic.
  • A small custom snippet on the lifterlms_course_completed action, which LifterLMS fires with the student ID and course ID.

Here is the snippet route, using Kit's v4 API endpoint for tagging a subscriber by email. It needs a v4 API key from Kit's developer settings (not the API Secret used by the add-on). Kit only tags subscribers who already exist, so a student who declined consent and was never added is not tagged.

<?php
// Map LifterLMS course IDs to Kit tag IDs.
function llmsx_kit_completion_tags() {
	return array(
		123 => 4567890, // Course ID => Kit tag ID.
	);
}

add_action( 'lifterlms_course_completed', 'llmsx_tag_completion_in_kit', 10, 2 );
function llmsx_tag_completion_in_kit( $student_id, $course_id ) {
	$map = llmsx_kit_completion_tags();
	if ( empty( $map[ $course_id ] ) || ! defined( 'LLMSX_KIT_V4_KEY' ) ) {
		return;
	}

	$user = get_userdata( $student_id );
	if ( ! $user ) {
		return;
	}

	$response = wp_remote_post(
		'https://api.kit.com/v4/tags/' . absint( $map[ $course_id ] ) . '/subscribers',
		array(
			'timeout' => 10,
			'headers' => array(
				'Content-Type' => 'application/json',
				'X-Kit-Api-Key' => LLMSX_KIT_V4_KEY,
			),
			'body'    => wp_json_encode( array( 'email_address' => $user->user_email ) ),
		)
	);

	if ( is_wp_error( $response ) ) {
		llms_log( 'Kit tagging failed: ' . $response->get_error_message(), 'kit-completions' );
	}
}

Define LLMSX_KIT_V4_KEY in wp-config.php, put the code in a small site plugin rather than the theme, and test on staging first.

Troubleshooting common problems

  • A new tag or sequence does not appear in the dropdown. Tags, sequences and custom fields are cached for 24 hours. Click Clear Local Cache on the integration screen. Developers can change the duration with the llms_ck_cache_duration filter.
  • A student enrolled but was not tagged. Check whether they ticked the consent checkbox. No consent means no tags, by design.
  • Purchases are missing in Kit. Check that the order went through a LifterLMS gateway and was not $0, and that purchase sync is switched on. WooCommerce orders are not sent.
  • Imported students flooded a sequence. Enrollment triggers the course automations whatever the source. Temporarily remove the sequence from the course's Kit tab before a bulk import.
  • Two welcome emails. The same sequence is set both under registration automations and on the course tab.

Frequently asked questions

Is the LifterLMS ConvertKit integration free?

No. LifterLMS Kit is a paid add-on, available on its own or in the Universe and Infinity bundles. Check the LifterLMS site for current pricing.

Does it work with Kit's free plan?

The add-on connects with your Kit API Secret. Which automation features you can use inside Kit, such as visual automations and purchase triggers, depends on your Kit plan.

Can Kit enroll someone in a LifterLMS course?

Not through this add-on; it only sends data to Kit. For tag-based enrollment, use WP Fusion's "Link with Tag" setting, or the LifterLMS REST API from an automation tool.

Kit or Mailchimp for LifterLMS?

Both have official add-ons. Kit's tag-first model suits creators who sell several courses. Our LifterLMS Mailchimp guide covers the alternative.

Next steps

Start small: enable the add-on, write a clear consent message, add one "Enrolled" tag and an onboarding sequence to your best-selling course, and switch on purchase sync. Add completion tagging only when you have an email that uses it.

If you want completion tags, two-way sync or a clean migration of an old tag mess, our LifterLMS integrations service can set it up and document it. Tell us how your funnel works and we will suggest the simplest setup that does the job.

Source: Getting Started with LifterLMS Kit and Kit's tag a subscriber API reference.

Add LifterLMS Expert to your preferred sources

Add lifterlmsexpert.com as a preferred source on Google, or open this article in your AI assistant to use it as a source.

  • Add as a preferred source on Google
Free consultation

Prefer expert help over DIY?

Skip the trial and error. Get specialist LifterLMS help and ship faster.

Talk to a LifterLMS Expert Explore our services

Replies within one business day